Panasonic AJ AJ-HDX900 Operating Instructions Manual page 59

Chapter 4 Adjustments and settings for recording
Set the marker and user boxes to superimpose on the output
signals from the VIDEO OUT connector by using the
respective items on the <VIDEO OUT SETTING> screen
(SYSTEM SETTING page) of the menu.
Variable
Item
range
VIDEO OUT OFF For setting the center marker to be
CENTR MARK 1 superimposed on the output signals of the
2 VIDEO OUT connector.
3 OFF: The center marker is not displayed.
4 1:
2:
3:
4:
VIDEO OUT OFF For setting the type of safety marker frame
SAFETY MARK 1 to be superimposed on the output signals of
2 the VIDEO OUT connector.
OFF: The safety marker frame is not
1:
2:
SAFETY AREA 80% For setting the size of the safety marker.
:
It is possible to set the size by units of 1%
90%
with a fixed ratio between of width and
:
100% height.
VIDEO OUT FRM ON For superimposing the frame marker on the
MARK OFF output signals from the VIDEO OUT
connector.
ON: To superimpose
OFF: Not to superimpose
FRM SIG 4:3 For setting the frame marker.
13:9 The VISTA setting is 16:8.65.
14:9
VISTA
VIDEO OUT USER ON For superimposing the user box on the
BOX OFF output signals from the VIDEO OUT
connector.
ON: To superimpose
OFF: Not to superimpose
O It is not superimposed when the VIDEO
OUT switch is set to the SD-SDI or the
VBS position.
USER BOX WIDTH 1 For setting the horizontal width of the user
:
box.
13
:
100
USER BOX 1 For setting the vertical height of the user
:
HEIGHT box.
13
:
100
USER BOX H POS –50 For setting the horizontal position of the user
:
box center.
+00
:
+50
USER BOX V POS –50 For setting the vertical position of the user
:
box center.
+00
:
+50
O The user box can be displayed in any position as a box-
type cursor.
Remarks
+ (large)
Center blank (large)
+ (small)
Center blank (small)
displayed.
Box
Corner frames
(continued)
<Notes>
O When the DOWNCON MODE item on the DOWNCON
SETTING screen is set to LT-BOX or S-CROP, the frame
marker and the safety marker are not displayed.
O Settings in the SAFETY AERA item and the FRM SIG
item are interlinked with the respective connectors of
VIDEO OUT, MON OUT, and REMOTE.
O Settings for the respective items of USER BOX WIDTH,
USER BOX HEIGHT, USER BOX H POS, and USER
BOX V POS are interlinked with the VIDEO OUT
connector and the MON OUT connector.
4
59