Mic/Audio1; Mic/Audio2 - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Chapter 7 Menu description tables

7-8-5 MIC/AUDIO1

Variable
Item
range
FRONT VR CH1 FRONT For setting whether or not to make the audio
W.L. control operational for the input system
REAR selected for CH1.
ALL
OFF
C U F
FRONT VR CH2 FRONT For setting whether or not to make the audio
W.L. control operational for the input system
REAR selected for CH2.
ALL
OFF
C U F
MIC LOWCUT CH1 FRONT For selecting the microphone low-cut filter
REAR for CH1.
W.L.
OFF
C U F
MIC LOWCUT CH2 FRONT For selecting the microphone low-cut filter
REAR for CH2.
W.L.
OFF
C U F
MIC LOWCUT CH3 FRONT For selecting the microphone low-cut filter
REAR for CH3.
W.L.
OFF
C U F
MIC LOWCUT CH4 FRONT For selecting the microphone low-cut filter
REAR for CH4.
W.L.
OFF
C U F
LIMITER CH1 ON For selecting the limiter for CH1.
OFF
C U F
LIMITER CH2 ON For selecting the limiter for CH2.
OFF
C U F
AUTO LEVEL CH3 ON For selecting the automatic adjustment of
OFF the recording level.
C U F
AUTO LEVEL CH4 ON For selecting the automatic adjustment of
OFF the recording level.
C U F
CUE REC SELECT CH1 For selecting the signals to be recorded on
CH2 the CUE track.
CH3
CH4
CH1+CH2
CH3+CH4
C U F
<Note>
The frequency characteristics when the microphone low-cut
filter is applied are 200 Hz to 10 kHz.
The underlining in the variable range column indicates the setting in the preset
mode.
(continued)
Remarks
TEST TONE

7-8-6 MIC/AUDIO2

FRONT MIC
POWER
REAR MIC POWER ON
MONITOR SELECT STEREO
FRONT MIC LEVEL –40dB
REAR MIC CH1
LVL
REAR MIC CH2
LVL
REAR LINE IN LVL
For AJ-HDX900E
For AJ-HDX900P
AUDIO OUT LVL
For AJ-HDX900E
For AJ-HDX900P
HEADROOM
For AJ-HDX900E
For AJ-HDX900P
WIRELESS WARN
Variable
Item
range
NORMAL For selecting the test signal.
ALWAYS NORMAL: The test tone signal is output to all
OFF
CHSEL
ALWAYS: The test tone signal is always
OFF:
CHSEL: The test tone signal is output to the
C U F
Variable
Item
range
ON For selecting the phantom power supply for
OFF the front microphone.
C U F
For selecting the phantom power supply for
OFF the rear microphone.
C U F
For selecting the format of the signals to be
MIX output to the monitor.
C U F
For selecting the input level of the front
–50dB microphone.
C U F
–50dB For selecting the input level of the rear
–60dB microphone.
C U F
–50dB For selecting the input level of the rear
–60dB microphone.
C U F
–3dB For selecting the rear line input level.
0dB
+4dB
C U F
–3dB For selecting the rear audio output level.
0dB
+4dB
C U F
For setting the headroom (reference level).
18dB
20dB
C U F
ON For selecting whether or not to output
OFF warnings when the reception of the wireless
receiver is poor.
C U F
Remarks
the channels when the CAM/BAR
switch has been set to BAR and
the CH1 AUDIO IN switch has
been set to FRONT.
output to all the channels when the
CAM/ BAR switch has been set to
BAR.
The test tone signal is not output.
channels for which the CH1 or CH2
AUDIO IN switch has been set to
FRONT when the CAM/BAR switch
is set to BAR. It is not output to
CH3 or CH4.
Remarks
129
7