Settings Of Signals Output From Mon Out Connector - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Camera-recorder
Hide thumbs Also See for AJ AJ-HDX900:
Table of Contents

Advertisement

Chapter 4 Adjustments and settings for recording
4-8-2 Settings of signals output from MON
OUT connector
Set the video signals output from the MON OUT connector
by using the MONI OUT item on the menu (<OUTPUT SEL>
screen on the SYSTEM SETTING page).
The HD-Y signals can be used for applying GEN LOCK to
other devices. It is impossible to superimpose markers and
characters on the HD-Y signals.
Even when the tape is replayed, images from the camera are
output.
Variable
Item
range
MONI OUT
HD-SDI
Set video signals output from the MON OUT
HD-Y
connector.
HD-SDI: For outputting the HD SDI signals
HD-Y:
Set to superimpose characters to the HD SDI signals output
from the MON OUT connector in the MONI OUT CHARA
item of the menu (<OUTPUT SEL> screen on the SYSTEM
SETTING page).
Variable
Item
range
MONI OUT CHARA
ON
Superimpose characters on the HD SDI
OFF
output
connector.
ON: To superimpose
OFF: Not to superimpose
<Note>
This does not link with the VIDEO OUT
CHARACTER switch.
Switch the signals output from the MON OUT connector by
using MONI OUT MODE item on the menu (<OUTPUT SEL>
screen on the SYSTEM SETTING page).
Variable
Item
range
MONI OUT MODE
CAM
Switch the signals output from the MON
VTR
OUT connector.
CAM: The camera images are output at all
VTR: In the recording or other EE mode,
60
Remarks
For outputting the analog HD-Y
signals
Remarks
signals
from
the
MON
OUT
Remarks
times.
camera images are output from the
connector; in playback mode, the
VTR's playback signals are output.
(continued)
Set the marker and user boxes to superimpose on the output
signals from the MON OUT connector by using the
respective items on the <MONITOR OUT SETTING> screen
(SYSTEM SETTING page) of the menu.
Variable
Item
range
MONI OUT CENTR
OFF
For setting the center marker to be
MARK
1
superimposed on the HD SDI output signals
2
of the MON OUT connector.
3
OFF: The center marker is not displayed.
4
1:
2:
3:
4:
MONI OUT
OFF
For setting the type of the safety marker
SAFETY MARK
1
frame to be superimposed on the HD SDI
2
output signals of the MON OUT connector.
OFF: The safety marker frame is not
1:
2:
SAFETY AREA
80%
For setting the size of the safety marker.
:
It is possible to set the size by units of 1%
90%
with a fixed ratio between of width and
:
100%
height.
MONI OUT FRM
ON
For superimposing the frame marker on the
MARK
OFF
HD SDI output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
FRM SIG
4:3
For setting the frame marker.
13:9
The VISTA setting is 16:8.65.
14:9
VISTA
MONI OUT USER
ON
For superimposing the user box on the HD
BOX
OFF
SDI output signals from the MON OUT
connector.
ON: To superimpose
OFF: Not to superimpose
USER BOX WIDTH
1
For setting the horizontal width of the user
:
box.
13
:
100
USER BOX
1
For setting the vertical height of the user
:
HEIGHT
box.
13
:
100
USER BOX H POS
–50
For setting the horizontal position of the user
:
box center.
+00
:
+50
USER BOX V POS
–50
For setting the vertical position of the user
:
box center.
+00
:
+50
O The user box can be displayed in any position as a box-
type cursor.
Remarks
+ (large)
Center blank (large)
+ (small)
Center blank (small)
displayed.
Box
Corner frames

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aj-hdx900eAj-hdx900p

Table of Contents