Vf Displays - Panasonic AJ AJ-HDX900 Operating Instructions Manual

Chapter 7 Menu description tables
7-4 VF
7-4-1 VF DISPLAY
Variable
Item
range
DISP CONDITION NORMAL NORMAL:
HOLD The statuses are displayed at all times.
HOLD:
The statuses are displayed only when the
C U F R MODE CHECK switch is pressed.
DISP MODE 1 For setting the display mode.
2 This sets what is displayed in the viewfinder
3 screen when the state of the unit is changed.
For details, refer to "4-7-4 Display modes
and setting changes/ adjustment result
messages."
C U F R
VF OUT Y For selecting the video signals to display in
NAM the viewfinder screen.
R Y:
G NAM: The signal with the highest level
B
R:
G:
B:
C U F R
VF DTL 0 For setting the detail level of the viewfinder
:
screen.
5
If it is set to "0", it has the same detail as the
main line system signals.
If it is set to "5", it has about double of details
of the main line system signals.
C U F R
ZEBRA1 DETECT 0% For setting the ZEBRA1 detection level (IRE
:
level).
70%
:
109%
C U F R
ZEBRA2 DETECT 0% For setting the ZEBRA2 detection level (IRE
:
level).
85%
:
109%
C U F R
ZEBRA2 ON For selecting ON or OFF for ZEBRA2 or
SPOT selecting SPOT.
OFF
C U F R
LOW LIGHT LVL OFF For setting how much lower the camera's
10% input light quantity should be in order for
15% "LOW LIGHT" to be displayed.
20%
25%
30%
35%
C U F R
RC MENU DISP. ON For the setting to display the menu in the
OFF viewfinder screen when the remote control
unit is connected to the unit.
C U F R
MARKER/ 50% For setting the brightness of markers and
CHAR LVL 60% characters in the viewfinder screen.
70%
80%
90%
100%
C U F R
The underlining in the variable range column indicates the setting in the preset
mode.
Remarks
Luminance signal
among the R, G and B signals is
output.
R channel signal
G channel signal
B channel signal
(continued)
Zebra pattern display
Video level
ON
109%
ZEBRA 2
DETECT
ZEBRA 1
DETECT
0%
ZEBRA 2
OFF SPOT
115
7