Panasonic AJ AJ-HDX900 Operating Instructions Manual page 51

Chapter 4 Adjustments and settings for recording
Display item
1 System mode
1080
720
2 Camera mode
60i
30P
24P
24PA
50i
25P
60P
50P
3 Shutter
11/¢¢.¢
speed/mode 1/60 (1/100) - 1/2000, HALF
4 Total length of
¢¢¢min
cassette tape
5 Remaining tape
¢¢¢min
=
=
6 Unit's REC display REC
7 Battery type PROPAC14 to AC_ADPT
8 Remaining battery
¢¢.¢V
charge/voltage
¢¢¢%
EMP
MAX
LOW/MID/HIGH
9 MODE CHECK
dedicated display
area (STATUS: S.GAIN30/36
DS.GAIN6:/10:/12:/
master gain, user
switch gain)
(Causes for ! LED GAIN (0 dB)
to light: Displayed GAIN (–3 dB)
on the entire DS.GAIN
screen.) LINE MIX
≥ An exclamation mark (!)
SHUTTER
appears next to items
WHITE PRE.
selected on the ! LED
EXTENDER
menu.
BLACK GAMMA.
≥ An exclamation mark
MATRIX
( ) appears next to
!
items for which the
COLOR COR.
! LED lights.
FILTER
(FUNCTION) VIDEO OUT
MONI OUT
(AUDIO: front controls CH1: ON/OFF
enable/disable)
CH2: ON/OFF
What is displayed
This indicates the mode that the unit operates in.
1080 interlace mode
720 progressive mode
This indicates the video systems for recording signals output from the
CCD on tape and outputting signals as HD SDI signals.
1080-59.94i
1080-29.97P or 720-29.97P
1080-23.98P or 720-23.98P (2-3 Pull-down)
1080-23.98P (2-3-3-2 Pull-down)
1080-50i
1080-25P or 720-25P
720-59.94P
720-50P
This indicates that the shutter speed is set to SYNCHRO SCAN.
This indicates that a fixed shutter speed has been set.
This indicates the total length of the cassette tape.
(This appears during a mode check.)
Under normal conditions, "¢¢¢min" lights, and this starts flashing
while the tape is reaching the end.
END When the tape has reached the end, "
INH When recording has been inhibited, "
This appears when the extender unit has been connected to indicate
the unit's recording status using characters. It lights during recording,
and it flashes while the unit's mode is transferring to recording or
when a warning has been issued.
This indicates the type of battery selected on the menu. "AC_ADPT"
appears when an external DC power supply has been input.
This indicates the remaining battery charge in 0.1V increments.
This indicates the remaining digital battery charge in percent.
This appears when the battery has no charge left.
This appears when the battery has a full charge.
This indicates the master gain setting.
–3 to 30 Example: LOW = 0
When S.GAIN and DS.GAIN functions have been allocated to the
user switches, the corresponding gain values are displayed.
15:/20:
This indicates the current GAIN status.
This indicates the current GAIN status.
This indicates the current DS.GAIN value.
This indicates whether the current LINE MIX is ON or OFF.
This indicates the current shutter status.
This indicates the current WHITE BAL status.
This indicates whether the current extender setting is on EX2 or OFF.
This indicates whether the current black gamma setting is ON or OFF.
This indicates whether the current MATRIX setting is A, B or OFF.
This indicates whether the current COLOR CORRECTION setting is
ON or OFF.
This indicates the current filter status.
This indicates the settings for signals output from the VIDEO OUT
connector.
This indicates the settings for signals output from the MON OUT
connector.
ON appears if the front CH1 control is enabled and OFF appears if it
is disabled.
ON appears if the front CH2 control is enabled and OFF appears if it
is disabled.
(continued)
Status when display appears
=
END" lights.
=
INH" lights.
4
51