Table of Contents
Advertisement
SYSTEM SETTING
The ____ in the Adjustable Range column indicates the preset mode.
SYSTEM MODE
Items/
Adjustable
Data Saved
Range
SYSTEM
1080-59.94i
MODE
1080-50i
480-59.94i
576-50i
– C U F –
REC SIGNAL CAM
SDI
– C U F –
REC FORMAT 1080-59.94i:
DVCPROHD/60i
AVC-I100/60i
AVC-I100/30PN
AVC-I100/24PN
AVC-I50/60i
AVC-I50/30PN
AVC-I50/24PN
1080-50i:
DVCPROHD/50i
AVC-I100/50i
AVC-I100/25PN
AVC-I50/50i
AVC-I50/25PN
480-59.94i:
DVCPRO50/60i
DVCPRO/60i
DV/60i
576-50i:
DVCPRO50/50i
DVCPRO/50i
DV/50i
– C U F R
162
Menu: Menu Description Tables
Menu Description Tables
Remarks
For setting the system frequency and the
recording format of the unit.
When this item is switched, turn "OFF" the
POWER switch on the unit and then turn
it "ON" again.
Notes
When the remote control unit (AJ-
RC10G) or the extension control unit
(AG-EC4G) is connected, this item is
not displayed.
To switch this item, operate the main
unit independently.
When the time code is in free run mode
and a change is made to the SYSTEM
MODE menu option, the time may not
be correctly recorded. After turning on
the camera-recorder, check the time
code and make a change to the setting
if required.
When USB DEVICE mode is selected,
no change can be made to this option.
Select video input signals.
CAM: Record the signal from the camera
SDI: Records input to the SDI IN
connector.
Notes
After the power has been turned OFF,
this setting defaults to CAM when the
power is turned ON again.
If "SDI" is selected, then this will be
recorded at 60i or 50i regardless of
settings in the REC FORMAT item.
Select the recording codec and recording
mode.
DVCPRO HD:
Recorded using the DVCPRO HD
codec. In the CAMERA MODE item,
further shooting modes can be
selected.
AVC-I 100:
AVC-I 50:
Recorded using the AVC-Intra100 or
AVC-Intra50 codecs. With these
AVC-Intra codecs, recording from
60i, 50i, 30PN, 24PN, and 25PN
(Native recording) can be selected.
DVCPRO50:
DVCPRO:
DV:
These are the codecs that can be
selected in SD mode. In the
CAMERA MODE item, further
shooting modes can be selected.
Items/
Adjustable
Data Saved
Range
CAMERA
(1080-59.94i
For setting the video system for shooting.
MODE
/480-59.94i)
Note
60i
In AVC-Intra mode, 24PA cannot be
30P
selected.
24P
24PA
(1080-50i
/576-50i)
50i
25P
– C U F R
ASPECT
16:9
Select the aspect ratio for recording. (In
4:3
SD mode only.
16:9: Record in <16:9> aspect ratio.
4:3:
– C U F R
SCAN
OFF
Specify whether image correction is used
REVERSE
ON
or not, when an anamorphic lens or a
lens for film applications is used.
OFF: Images are not corrected.
ON: Images are corrected. The vertical
– C U F R
0%
SETUP
Switch the setup. (For 480-59.94i only
7.5%A
0%:
7.5%A: Setup is switched to 7.5% for the
– C U F R
AUDIO SMPL
16BIT
Select the bit-rate for the recorded audio.
RES
24BIT
(Only when using the AVC-Intra codec)
16BIT: Records in 16-bit.
24BIT: Records in 24-bit.
Notes
Playback clips recorded in 24 bits on a
24 bit compatible P2 device or with a
P2 Viewer. Clip number is displayed in
red and cannot be played on P2
devices that are not 24 bit compatible.
Audio is not played back correctly on
P2 Viewers that are not 24 bit
compatible. Please use the latest
version of the P2 Viewer.
For the latest information on 24 bit
compatible P2 devices and the P2
Viewer, see the support page for P2 at
the following Website.
http://pro-av.panasonic.net/
– C U F R
Remarks
Record in <4:3> aspect ratio.
and horizontal orientations are
inverted.
Setup is switched to 0% for both the
camera output and the recording.
camera output and 0% for the
recording.
Advertisement
Table of Contents
