Adding Paper To The Tandem Lcf (Large Capacity Feeder) - Panasonic DP-6530 Operating Instructions Manual

2. ADD PAPER SYMBOL (Cont.)

Adding Paper to the Tandem LCF (Large Capacity Feeder)

1 Pull the tandem LCF out carefully until it comes to
1
a stop.
- Be careful not to touch the drawer slide rail.
2
3
2 Open some packages of paper, take out entire reams
of paper and set them aligned in tray
4 - When setting the paper, set the paper for
side, and set it for
set neatly if you pile it up gradually and alternately in trays
and
A
to the labels attached in the tandem LCF ).
5
- Up to 2500 sheets of paper (20 lb Bond) can be set.
- Paper starts being fed from the elevator tray
and when it runs out of paper, the paper on tray
to the position
6
- Set the paper so that it does not protrude beyond the line
of indication shown on the rear guide plate.
- Do not use creased, folded, wrinkled or damp sheets of
paper.
7
- Be careful not to touch the drawer slide rail.
3
Close the cover of the tandem LCF.
8
- Close the drawer completely. The elevator tray automatically
moves up to the paper feeding position.
9
Be careful not to let your fingers be caught when closing the
drawer.
10
11
12
7-4
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
to the left side. (The paper can be
B
.) Be sure that the center lever is not open (refer
B
.
A
and tray .
A B
to the right
A
MAX
at first,
A
moves
B
A
B
Slide Rail