Panasonic DP-6530 Operating Instructions Manual page 32

2. SETTING COPY PAPER (Cont.)
Changing the Paper Size of the Drawer/Setting the Drawer for Special Uses (Cont.)
3 Press the drawer key corresponding to that in which
1
the paper has been set, then press the key of the
paper type newly set.
- If you want to select the COVER , INSERT or TAB PAPER,
make sure that paper with the same size as that for the
2
COVER, INSERT, or TAB PAPER is set in the other drawer
including the optional external LCF (Large Capacity Feeder).
3
Press THICK 1 or THICK 2 depending on the paper weight
4
of cover sheet, insertion, and special sheet. In the case of
cover sheet and insertion, '
key.
* For example, when inserting 90 lb. Index paper, press
5
INSERT key, and press THICK 1 key.
- The setting is completed as shown on the right.
6
7
Up to 2 drawers can be set for the sheet insertion.
After having set INSERT 1, press the drawer key corresponding
8
to that in which the paper for INSERT 2 has been set, and
press the INSERT key.
9
10
Clearing the Drawer for Special Uses
Press the drawer key corresponding to that which is
set for the special use, then press the key of the same
11
mode as the drawer.
- If you clear INSERT 1 when both INSERT 1 and INSERT 2 are
set, the drawer for INSERT 2 changes to INSERT 1.
12
- Replace the paper set in the drawer as required.
- Press the RETURN key on the touch panel or the
JOB STATUS key or either lighting one of
PRINTER/NETWORK key on the control panel to return to
the machine to the basic screen (before JOB STATUS key is
pressed on the step 2).
2-8
HOW TO MAKE COPIES
' or ' ' is displayed in the drawer
COPY key or