Continuous Original Feeding / Single Original Feeding - Panasonic DP-6530 Operating Instructions Manual

1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING

When using the reversing automatic document feeder, you can select the continuous feed mode (default
1
setting) where multiple (or single) originals are continuously fed in one by one, or the single-feed mode
where if you insert an original, it is automatically pulled in and starts being copied.
2
1 Place paper in the drawer(s).
3
2
Place the original(s) on the reversing automatic
document feeder.
4
- Originals can be set maximum 100 sheets at a time.
3
Press the PROGRAM key to enter the program
menu, and press the ADF key.
5
6
7
4
Press the ADF key.
8
9
Select other copy modes as required.
5 Press the
10
11
When the number of originals is too large to be set at one
time, you can divide the originals into two to ten sets and
set them one after another. To do so, place the first set of
originals first, and press the CONTINUE key while the
scanning is in progress. After they have been scanned,
12
place the previous set of originals.
5-2
USING THE SPECIAL FUNCTIONS
Continuous Feed Mode
Page 2-11
START key.
Page 2-4