Operation Chart; Quick Operation Chart; Adding Paper - Panasonic DP-8020E Operating Instructions Manual

■ Quick Operation Chart

Adding Paper

● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
1
NOTE:
To change the paper size, refer to
page 62.
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
1
4
14
Downloaded From ManualsPrinter.com Manuals
Getting To Know Your Machine

Operation Chart

From
ADF/i-ADF
(Option)
From
Platen
Turn the Power
Switch to the
ON position
(ON)
(OFF)
2
Paper Tray
Load Paper: Face Up
Paper Weight: 16 - 24 lb (60 - 90 g/m
Paper Capacity: 550 Sheets (20 lb (80 g/m
2
PUSH
Sheet Bypass
Adjust the width guides.
Width Guides
Incorrect adjustment may cause the
paper to wrinkle, misfed, or skew.
1
Face Up
Original Guides ∗ ∗ ∗ ∗ ∗
Adjust to the
or
original's width
∗ ∗ ∗ ∗ ∗
Hold the guides by the center when
adjusting the width
Original Guides
INV
INV LTR
INV
INV
LTR
LGL
LTR
LDR
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
Max Level
Indicator
Until it stops
2
Tray
If set to other
(Max. 50 Letter
function mode
size originals)
(DP-8020E/8020P
only)
LGL LDR
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
3
Paper Tray
NOTE:
2 )
Load the paper properly, and ensure
2
))
that it does not exceed the Max. Level
indicator.
3
Face Down
Until it stops
Upper Limit Guides
Load Paper
(Do not exceed limit guides)
Paper Weight: 15-34 lb (55 - 133 g/m
Paper Capacity: 50 sheets/20 lb (80 g/m
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper, then load them together onto
the tray.
4
2 )
2
)