Panasonic DP-6530 Operating Instructions Manual page 19

FUNCTION CLEAR key
When this key is pressed, all selected copy modes are cleared to default settings.
* Automatic Function Clear
STOP key
Use this key to stop an ongoing scan and copy operation.
START key
Press this key to start copying.
INTERRUPT key
While copying is already in progress, press this key when you want to make copies of different originals.
Pressing the key again will return you to the previous copy job.
ENERGY SAVER key
When you are not going to use the machine for a while, press this key, which automatically turns off all
display lamps. To resume copying, press this key again.
If you press this key when the optional printer controller is installed, the power supply to the printer
board is not cut off, which allows automatic return of the device when it receives printer data.
TIMER Lamp
TIMER lamp lights when the weekly timer is being used.
Clip Tray
Put clips or staples unfastened out of originals.
Right bottom of this page
Automatic Function Clear
Even if you do not press the
key, within the specified period of time after copying
is finished or after the last key is pressed in a copy
procedure, the automatic function clear mode will
work to clear all settings to defaults, and the basic
screen or the quick screen will be displayed.
While the department management function is
being operated, the display returns to the depart-
ment code input screen.
Page 2-2
Page 2-15
FUNCTION CLEAR
Page 1-9
1
2
3
4
5
6
7
8
9
10
11
12
1-5