Panasonic DP-6530 Operating Instructions Manual page 135

2
Rotate the left end of the holder, then pull out the
empty toner bottle with both hands as shown on
the right.
Return used toner bottles to your service technician.
3 Shake the new toner bottle well to loosen the
toner inside.
4 Holding the new toner bottle as shown on the right,
pull out the seal in the direction of the arrow.
5 Match the label (orange) on the machine with the
shutter (orange) on the toner bottle, then insert
the toner bottle to the end.
- If you cannot insert the toner bottle completely, rotate it
slightly to check the position and insert it again.
- If the toner scatters, wipe it off completely.
6
Return the toner bottle holder back to its original
position.
7
Close the front cover.
- The following message appears:
Wait adding toner
The machine automatically starts supplying toner.
- When toner has finished being supplied, the touch panel
returns to the basic menu and the current job automatically
resumes.
Holder
Label (orange)
Shutter (orange)
1
2
3
4
5
6
7
8
9
10
11
12
7-7