Edge Erase - Panasonic DP-6530 Operating Instructions Manual

2. EDGE ERASE

If your original has a dirty or torn edge, it may be reproduced as a black mark on the copy. In that case,
1
use Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black
marks.
* This function is available in only case of the standard-size original.
2
3
4
1 Place paper in the drawer(s).
- When using this mode in bypass copying, be sure to specify
5
the paper size.
2
Place the original(s).
6
3 Press the EDIT key to enter the edit menu, and
press the EDGE ERASE key.
7
8
4 Adjust the width of the white border, then press
9
the SET key.
- The default width of the white border is 5 mm (0.197").
- To adjust the width, press the
select the desired number, then press the SET key.
10
11
Select other copy modes as required.
5 Press the
12
4-4
USING THE EDITING FUNCTIONS
Page 2-4
Page 5 -10, 5 -11
Page 2-9
5mm or 20mm
START key.
key to
*25.4mm = 1"