General Copying Procedures - Panasonic DP-6530 Operating Instructions Manual

Panasonic digital imaging systems operating instructions model no. dp-6530/8130
Table of Contents

Advertisement

1. GENERAL COPYING PROCEDURES

After placing, or confirming that there is, paper in the drawers, place the originals. When the
1
key is pressed with any settings unchanged, copies are made in the initial (default) settings *
make copies as desired by setting different copy modes.
The initial (default) settings of the machine at the time of installation are as shown below.
2
*1 The copy modes that are automatically set when the power is turned on, when the energy-saving
mode is cleared or when the
the initial (default) settings.
3
Initial (default) settings
Reproduction ratio. ...100%
Automatic paper selection
Auto image density
4
Non-sort Non-staple mode
5
1
Place paper in the drawer(s).
6
2
Place the original(s).
7
- Acceptable originals
- When using the reversing automatic document feeder
8
3
Select the copy modes
- Use the touch panel and the digital keys.
9
4
Press the
10
- When the reversing automatic document feeder is used and
the continuous feed mode is selected (
11
5
Place the next original (2nd side) and press the
START key.
- Set the first page of your originals first.
12
- You can also press the YES key before pressing the
START key to perform the same operation.
(See the comment on the right)
- Repeat this step for the subsequent originals.
2-2
HOW TO MAKE COPIES
FUNCTION CLEAR key is pressed on the control panel are called
Copy quantity ......1
1-sided copies from 1-sided originals
Standard mode (original image type)
Continuous original feed mode
Copying Procedure
When the desired paper is not placed in any of the drawers or the large capacity feeder :
- Setting the drawer
Page 2-6
Page 2-9
(
in the illustration on the page on the right)
- Selecting multiple copy modes may be restricted depending on their combination.
- Copy modes cannot be changed after the
when originals are divided into multiple sets when fed).
START key
(
- Acceptable copy paper
- Bypass copying
- When placing an original on the glass
START key is pressed (including the case
in the illustration on the page on the right)
Page 5-2), copying begins.
Page 2-4
Page 5-8
Page 2-10
Page 2-11
.
.
• The above display will not appear for
Single-sided copying when Non-Sort
or Non-Staple is selected.
START
1
. You can

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-8130

Table of Contents