Understanding Common Operations; Selecting A Source; Listening Through The Headphones; Adjusting The Volume - Onkyo CR-B8 Instruction Manual

CRB8.book 22 ページ ２００５年８月１８日 木曜日 午後６時４０分

Understanding Common Operations

STANDBY
indicator
INPUT buttons
STANDBY/ON

Turning the Unit On and Standby

CD receiver
Press STANDBY/ON on the unit or on the remote con-
troller.
If you press the same button again, the unit will turn
off and enter Standby mode.
Tip:
• When you start playing (or turn on the power to) an
Onkyo RI Dock, CD recorder or cassette tape deck
that is connected to the CD receiver via an
and analog audio cables, the power to the CD receiver
is automatically turned on. Also, if you turn on or off
the power to the CD receiver, the power to such a
device is automatically turned on or off (standby).

Adjusting the Volume

CD receiver
Turn VOLUME clockwise to increase the volume or
counterclockwise to decrease the volume on the unit.
/
Press VOLUME on the remote controller.
22
STANDBY/
VOLUME

Selecting a Source

You can select CD, FM, AM, or connected external
Remote
audio/video equipment (HDD, TAPE, LINE) as the
controller
audio source.
To select the audio source, press the INPUT
button repeatedly.
CD
LINE

Listening through the Headphones

Decrease the volume, then connect the stereo head-
phones mini plug to the PHONES jack.
You can adjust the volume and mute the sound as
cable
described above.
The speakers will reproduce no sound while the head-
phones are connected.
Remote
controller
ON
INPUT buttons
VOLUME
FM AM
TAPE HDD
To PHONES jack
/
or