Rear Panel - Onkyo CR-B8 Instruction Manual

CRB8.book 10 ページ ２００５年８月１８日 木曜日 午後６時４０分
Part Names and Functions —Continued

Rear Panel

The page numbers in parentheses show where you can find the main explanation for each item.
A
AM ANTENNA (14, 15)
These push terminals are for connecting an AM
antenna.
B
FM ANTENNA (14, 15)
This jack is for connecting an FM antenna.
C
LINE IN (18)
These terminals are for connecting audio output of
external devices such as TV or turntable with a
built-in phono equalizer.
D
TAPE IN/OUT (18)
This analog audio input and output are for connect-
ing a recorder with an analog audio input and output
(cassette, Mini Disc, etc.).
E
HDD IN/OUT (19)
Here you can connect an RI Dock or a CD recorder.
F
REMOTE CONTROL (18-20)
This (Remote Interactive) jack can be con-
nected to an jack on another Onkyo component.
The CD receiver's remote controller can then be
used to control that component. To use
must make an analog audio connection (RCA)
between the CD receiver and the other component,
even if they are connected digitally.
10
1
2
3
4
5
6
7
, you
8
9
G
OPTICAL DIGITAL OUT (20)
The optical output can be used to connect a CD
recorder or other digital recorder with an optical
digital input. The CD receiver's CD signal is output
through this terminal.
H
SPEAKERS (16)
These terminals are for connecting speakers.
I
PRE OUT (17)
The SUBWOOFER jack is for connecting a pow-
ered subwoofer.
See pages 14-20 for connection information.