CRB8.book 23 ページ 2005年8月18日 木曜日 午後6時40分
Adjust sound quality during playback with CD or radio, etc.
Adjusting Bass
1
Press TONE repeatedly to select
"Bass."
2
Press
ENTER to set.
• The factory default value is set to
"±0"; you can adjust the value by
increment or decrement of 2 steps
between –10 and +10.
• To adjust treble, press ENTER.
Note:
If you leave the system untouched for 8
seconds, the display returns to the previ-
ous screen.
Emphasizing the Low End Using the
Remote Controller
Press S.BASS repeatedly.
Pressing S.BASS repeatedly will change the option in
the following order.
S.Bass Off
S.Bass 1
(Low end is emphasized.)
S.Bass 2
(Low end is even more emphasized.)
Understanding Common Operations —Continued
2
/
to adjust, and
MUTING
1
S.BASS
Adjusting Treble
1
Press TONE repeatedly to select
"Treble."
2
Press
/
ENTER to set.
• The factory default value is set to
"±0"; you can adjust the value by
increment or decrement of 2 steps
between –10 and +10.
• Press ENTER to return to the previous
display.
Note:
If you leave the system untouched for 8
seconds, the display returns to the previ-
ous screen.
Muting the Sound
Press MUTING on the remote controller. The MUTING
and Volume indicators blink in the display.
MUTING
To restore the sound, press MUTING again.
Tips:
During muting:
• If you turn the VOLUME knob on the CD receiver or
/
press VOLUME
on the remote controller, the
sound will be restored.
• If you turn the unit off and then on again, the sound
will be restored.
to adjust, and
23