Onkyo CR-315 Instruction Manual

Onkyo CR-315 Instruction Manual

Onkyo cr-315: instruction manual
Hide thumbs Also See for CR-315:
Table of Contents

Advertisement

CR515,315_En.book Page 1 Wednesday, June 7, 2006 2:36 PM
CD Receiver
CR-515
CR-315
Instruction Manual
Thank you for purchasing an Onkyo CD Receiver.
Please read this manual thoroughly before making
any connections and plugging it in.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new CD Receiver.
Please retain this manual for future reference.
Contents
Getting Started .......................... 2
Connections ............................ 16
Basic Operation ...................... 27
Playing a Disc.......................... 30
Listening to the Radio ........... 39
Clock and Timer ...................... 47
Miscellaneous ......................... 54
Troubleshooting................................ 54
If you can't resolve an issue, try reset-
ting the CD receiver by holding down
the [ ] button and pressing the
[STANDBY/ON] button.
E
n

Advertisement

Table of Contents
loading

Summary of Contents for Onkyo CR-315

  • Page 1 CD Receiver CR-515 CR-315 Instruction Manual Thank you for purchasing an Onkyo CD Receiver. Please read this manual thoroughly before making any connections and plugging it in. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD Receiver.
  • Page 2: Important Safety Instructions

    CR515,315_En.book Page 2 Wednesday, June 7, 2006 2:36 PM WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
  • Page 3: Precautions

    5. Never Touch this Unit with Wet Hands —Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer. 6. Handling Notes •...
  • Page 4: Supplied Accessories

    CR515,315_En.book Page 4 Wednesday, June 7, 2006 2:36 PM Precautions —Continued This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit.
  • Page 5: Before Using The Cd Receiver

    CR515,315_En.book Page 5 Wednesday, June 7, 2006 2:36 PM Before Using the CD Receiver Installing the Batteries Detach the battery cover by pressing the tab and pulling up the cover. Insert two AA-size batteries into the bat- tery compartment. Carefully follow the polarity diagram (positive (+) and negative (–) symbols) inside the battery compartment.
  • Page 6: Features

    • 4-Program Timer (Play or Rec / Once or Every) • Sleep Timer • Battery-Free Memory Backup • Headphone Jack • Aluminium Front Panel • RI-Dock Compatible Remote Control (iPod Control Capable) * VLSC and the VLSC logo are registered trademarks of Onkyo Corporation.
  • Page 7: Table Of Contents

    Connecting Other Components ...19 About Connections ...19 Cables and Jacks ...19 Connecting a Subwoofer ...19 Connecting an Onkyo Cassette Deck ...20 Connecting an Onkyo MD recorder ...21 Connecting an Onkyo RI Dock (Remote Interactive Dock) ...22 Connecting an Onkyo CD Recorder (CR-515) ...23...
  • Page 8: Getting To Know The Cd Receiver

    CR515,315_En.book Page 8 Wednesday, June 7, 2006 2:36 PM Getting to Know the CD Receiver Front Panel CR-515 CR-315...
  • Page 9 This stereo minijack is for connecting an audio source, such as an MP3 music player or personal computer. DISPLAY button (CR-315) (31, 34, 43) Used to change the information shown on the dis- play. Also used to select characters when naming radio presets.
  • Page 10: Display

    CR515,315_En.book Page 10 Wednesday, June 7, 2006 2:36 PM Getting to Know the CD Receiver —Continued Display SLEEP indicator Lights up when the Sleep function has been set. MP3 indicator Lights up when an MP3 CD is loaded. PCM indicator Lights up when the digital input signal received by the DIGITAL IN jack is PCM.
  • Page 11: Rear Panel

    These analog audio inputs and outputs are for con- necting a recorder with an analog input and output such as a CD recorder, or an Onkyo RI Dock. AM ANTENNA (16, 17) These push terminals are for connecting an AM antenna.
  • Page 12: Remote Controller

    CR515,315_En.book Page 12 Wednesday, June 7, 2006 2:36 PM Getting to Know the CD Receiver —Continued Remote Controller RC-662S (CR-515) RC-660S (CR-315)
  • Page 13 ] buttons (31, 42) Used to select the previous or next track or radio preset. Can also be used with an Onkyo RI Dock or CD recorder. With an Onkyo cassette deck, they work as rewind and fast forward buttons.
  • Page 14: Disc Notes

    CR515,315_En.book Page 14 Wednesday, June 7, 2006 2:36 PM Disc Notes Supported Discs The CD receiver supports the following discs. Disc Logo Format or file type Audio CD Audio CD, MP3 CD-R Audio CD, MP3 CD-RW Audio CD (Session 1), CD Extra MP3 (Session 2) •...
  • Page 15 CR515,315_En.book Page 15 Wednesday, June 7, 2006 2:36 PM • The following ID3 tags are supported: versions 1.0/1.1 and 2.2/2.3/2.4. Versions 2.5 and later are not sup- ported. Normally, version 2.2/2.3/2.4 tags have prior- ity and will be displayed regardless of the ID3 VER 1 preference on page 37.
  • Page 16: Connecting Antennas

    CR515,315_En.book Page 16 Wednesday, June 7, 2006 2:36 PM Connecting Antennas This section explains how to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commercially available outdoor FM and AM antennas. The CD receiver won’t pick up any radio signals without an antenna connected, so you must connect the antenna to use the tuner.
  • Page 17 CR515,315_En.book Page 17 Wednesday, June 7, 2006 2:36 PM Connecting an Outdoor FM Antenna If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, but usable results can sometimes be obtained when installed in an attic or loft.
  • Page 18: Connecting Speakers

    CR515,315_En.book Page 18 Wednesday, June 7, 2006 2:36 PM Connecting Speakers Connecting Your Speakers • Connect the right speaker to the CD receiver’s right (R) SPEAKERS terminals. Connect the left speaker to the left (L) SPEAKERS terminals. • Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the CD receiver. Connect the negative (–) terminal on each speaker to the corresponding negative (–) terminal on the CD receiver.
  • Page 19: Connecting Other Components

    CR515,315_En.book Page 19 Wednesday, June 7, 2006 2:36 PM Connecting Other Components About Connections • Before making any connections, read the manuals supplied with your other components. • Don’t connect the power cord until you’ve completed and double-checked all connections. Connection Color Coding RCA-type audio connections are usually color-coded: red and white.
  • Page 20: Connecting An Onkyo Cassette Deck

    • To use , you must connect the Onkyo cassette deck to the CD receiver with an (RCA). In addition, the Input Display for the MD/TAPE jacks must be set to “TAPE.” Since this is the default setting, unless you’ve changed it, it can be left as it is (see page 29).
  • Page 21: Connecting An Onkyo Md Recorder

    • To use , you must connect the Onkyo MD recorder to the CD receiver with an (RCA). In addition, the Input Display for the MD/TAPE jacks must be set to “MD” (see page 29).
  • Page 22: Connecting An Onkyo Ri Dock (Remote Interactive Dock)

    Connecting an Onkyo RI Dock (Remote Interactive Dock) The following diagram shows how to connect an optional Onkyo RI Dock (Remote Interactive Dock). Connect the CD receiver’s DOCK/CDR IN jacks (DOCK IN jacks on the CR-315) to the RI Dock’s AUDIO OUT jacks. CR-515’s...
  • Page 23: Connecting An Onkyo Cd Recorder (Cr-515)

    The following diagram shows how to connect a portable audio device (e.g., MP3 player, MD player, CD player). Connect the CD receiver’s LINE 2 IN jack (LINE IN jack on the CR-315) on the front panel to the portable audio device’s output jack.
  • Page 24: Connecting A Component With A Digital Audio Output (Cr-515 Asian Model Only)

    “CD-R/dig” (see page 29). • If you connect an audio processor such as the Onkyo UE-205, you must set the Input Display for DOCK/CDR to “PC,” and set the Input Display for OPTICAL DIGITAL IN to “PC/dig,” otherwise the wrong input source may be selected when playback starts (see page 29).
  • Page 25: Connecting The Power Cord

    CR515,315_En.book Page 25 Wednesday, June 7, 2006 2:36 PM Connecting a TV Connect the CD receiver’s LINE 1 IN jacks (use the DOCK IN jacks on the CR-315) to the TV’s audio output jacks. CR-515’s rear panel LINE 1 TAPE DOCK/ : Signal flow...
  • Page 26: First Time Setup (European Model Only)

    CR515,315_En.book Page 26 Wednesday, June 7, 2006 2:36 PM First Time Setup (European Model Only) Setting the Clock with the AccuClock Function (European Model Only) To use the AccuClock function, the CD receiver must be able to receive RDS radio stations, which means an FM antenna must be connected.
  • Page 27: Basic Operation

    Press the [STANDBY/ON] button again to set the CD receiver to Standby. The STANDBY indicator lights up. Tip: When you start playback on (or turn on) an Onkyo RI Dock, CD recorder, MD recorder, or cassette deck that’s connected to the CD receiver with an log audio cable, the CD receiver turns on automatically.
  • Page 28: Adjusting The Bass And Treble

    Direct function will be turned off. CR-515 TONE ENTER DIRECT TONE CR-315 MUTING Using the Direct Function To turn the Direct function on or off, press the [DIRECT] button on the CD receiver. When the Direct function is off, the tone controls can be used to adjust the sound.
  • Page 29: Changing The Input Display

    You can choose what name is displayed when an input source is selected so that it matches the type of component that you’ve connected to the MD/TAPE IN, DOCK/CDR IN, or DIGITAL IN. When you connect an Onkyo component, it’s important that you select the input source name that matches the type of component for properly.
  • Page 30: Playing Cds

    Turn the multi control to the right to select subse- quent tracks. • On MP3 CDs, you can select MP3 files in other folders ] button. (see page 32). Selecting Tracks (CR-315) To return to the beginning of the track currently playing, press the Previous [ ] button.
  • Page 31: Using The Remote Controller

    During playback or while playback is paused, press the remote controller’s [DISPLAY] button repeatedly to display the following CD information. On the CR-315, you can also use the CD receiver’s [DISPLAY] button to display this information. Playing CDs —Continued Press to display more CD infor-...
  • Page 32: Selecting/Playing Mp3 Files

    CR515,315_En.book Page 32 Wednesday, June 7, 2006 2:36 PM Playing CDs —Continued Selecting MP3 Files On an MP3 CD, MP3 files may be organized in a hierar- chically, with folders containing files and subfolders, as shown below. On the CD receiver, there are two modes for selecting MP3 files: Navigation mode and All Folder mode .
  • Page 33 CR515,315_En.book Page 33 Wednesday, June 7, 2006 2:36 PM Selecting MP3 Files in All Folder Mode Number buttons With All Folder mode, you don’t have to navigate the folder hierarchy because all folders that contain MP3 files appear at the same level. If random playback is currently selected, press the [YES/MODE] button to cancel it before proceeding.
  • Page 34: Displaying Mp3 Information

    Sampling rate and bit rate: Sampling rate and bit rate of the current MP3 file. Notes: • On the CR-315, you can also use the CD receiver’s [DISPLAY] button to display this information. • To display the disc name, press the [DISPLAY] button while playback is stopped.
  • Page 35: Memory Playback

    CR515,315_En.book Page 35 Wednesday, June 7, 2006 2:36 PM Memory Playback With memory playback, you can create a playlist of up to 25 tracks. MENU/NO/ CLEAR YES/MODE ENTER Memory playback can be set only when the input source is set to CD and playback is stopped. Press the [YES/MODE] button repeatedly until the MEMORY indi- cator appears.
  • Page 36: Random Playback

    CR515,315_En.book Page 36 Wednesday, June 7, 2006 2:36 PM Playing CDs —Continued Random Playback With random playback, all of the tracks on the disc are played in random order. Random playback can be set only when the input source is set to CD and playback is stopped. Press the [YES/MODE/SHUFFLE] button repeatedly until the RAN- DOM indicator appears.
  • Page 37: Setting Mp3 Preferences

    CR515,315_En.book Page 37 Wednesday, June 7, 2006 2:36 PM Setting MP3 Preferences With the MP3 preferences, you can change the way MP3 file information is displayed and the way MP3 CDs are played. The MP3 preferences can be set only when playback is stopped.
  • Page 38 CR515,315_En.book Page 38 Wednesday, June 7, 2006 2:36 PM Playing CDs —Continued Hide Number? (Disable /Enable ) This preference determines whether or not the numbers at the beginning of file and folder names are displayed. When you create an MP3 CD on a personal computer, you cannot normally determine the playback order of the files.
  • Page 39: Listening To The Radio

    CR515,315_En.book Page 39 Wednesday, June 7, 2006 2:36 PM Listening to the Radio Tuning into Radio Stations TUN/ When tuned into a station, the Tuned appears. When tuned into a stereo FM station, the FM ST indicator appears as well. AUTO FM ST Tuning into weak stereo FM stations...
  • Page 40: Presetting Fm Stations Automatically (Auto Preset)

    CR515,315_En.book Page 40 Wednesday, June 7, 2006 2:36 PM Listening to the Radio —Continued Presetting FM Stations Automatically (Auto Preset) With the Auto Preset function, you can automatically preset all of the FM radio stations available in your area in one go. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations.
  • Page 41: Presetting Am/Fm Stations Manually

    CR515,315_En.book Page 41 Wednesday, June 7, 2006 2:36 PM Presetting AM/FM Stations Manually With the Preset Write function, you can manually preset individual AM and FM radio stations. Presets make it easy to select your favorite stations and eliminate the need to tune the radio manually each time you want to change stations. FM stations can also be preset automatically (see page 40).
  • Page 42: Selecting Preset Stations

    1 Use the [INPUT] button to select AM or FM. 2 Turn the multi control to select a preset. On the CR-315, you can also use the front panel con- trols. BAND 1 Use the [INPUT] button to select AM or FM.
  • Page 43: Displaying Radio Information

    CR515,315_En.book Page 43 Wednesday, June 7, 2006 2:36 PM Displaying Radio Information Press the remote controller’s [DISPLAY] button repeatedly to display more radio information. On the CR-315, you can also use the CD receiver’s [DISPLAY] button to display this information. AM/FM Frequency *Preset name...
  • Page 44: Naming Presets

    CR515,315_En.book Page 44 Wednesday, June 7, 2006 2:36 PM Listening to the Radio —Continued Naming Presets You can name presets for easy identification. The preset name may contain of up to eight characters. Number buttons Select the preset you want to name (see page 42).
  • Page 45: Copying Presets

    CR515,315_En.book Page 45 Wednesday, June 7, 2006 2:36 PM Copying Presets With the Preset Copy function, you can organize your presets in the order you want. When you copy a preset, its name is also copied. MENU/NO/ CLEAR Select the preset you want to copy (see page 42).
  • Page 46: Erasing A Preset's Name

    CR515,315_En.book Page 46 Wednesday, June 7, 2006 2:36 PM Listening to the Radio —Continued Erasing a Preset’s Name Select the preset whose name you want to erase (see page 42). Press the [MENU/NO] button, and then use the Previous and Next ] buttons to select “NameErase?”...
  • Page 47: Setting The Clock

    CR515,315_En.book Page 47 Wednesday, June 7, 2006 2:36 PM Setting the Clock Setting AccuClock to Use a Specific Station (European Model Only) The AccuClock function normally uses the FM station with the strongest signal to set the clock. However, if the clock cannot be set properly using that station, you can specify which FM station the AccuClock function should use.
  • Page 48: Setting The Clock Manually

    CR515,315_En.book Page 48 Wednesday, June 7, 2006 2:36 PM Setting the Clock —Continued Setting the Clock Manually The time can be displayed in either 12- or 24-hour for- mat. STANDBY/ON Number button TIMER Press the [TIMER] button repeat- edly until “Clock” appears. Press [ENTER].
  • Page 49: Using The Timers

    CD receiver off after a specified period. The timers can be used with other Onkyo components that are connected to the CD receiver via 20 to 24 for hookup details).
  • Page 50: Programming The Timers

    ] buttons to select Play or Rec, and then press [ENTER]. If you can’t select Rec, make sure that your Onkyo cassette deck or MD recorder is properly connected to the MD/TAPE jacks (see pages 20 and 21) and the Input Display is set accordingly (see page 29).
  • Page 51 CR515,315_En.book Page 51 Wednesday, June 7, 2006 2:36 PM If you selected Once, use the Pre- vious and Next [ tons to select the day, and then press [ENTER]. You can select: SUN, MON, TUE, WED, THU, FRI, or SAT. If you selected Every, use the Pre- vious and Next [ tons to select the day, Everyday, or...
  • Page 52: Turning Timers On And Off

    CR515,315_En.book Page 52 Wednesday, June 7, 2006 2:36 PM Using the Timers —Continued Turning Timers On and Off Once a timer has been programmed, you can turn it on or off as necessary. For example, while you’re on holiday, you may want to turn off the timer you use as an early- morning alarm.
  • Page 53: Using The Sleep Timer

    8 seconds, then the pre- vious display reappears. Note: The sleep timer will be ignored while dubbing a CD to an Onkyo cassette deck or MD recorder is in progress. The CD receiver will automatically switch to Standby when the dubbing is complete.
  • Page 54: Troubleshooting

    If you have any trouble using the CD receiver, look for a solution in this section. If you can’t resolve the issue yourself, try resetting the CD receiver before contacting your Onkyo dealer. To reset the CD receiver to its factory defaults, turn it on and, while holding down the [ ] button, press the [STANDBY/ON] button.
  • Page 55 • Make sure the Input Display matches the type of device that you’ve connected to the CD receiver (see page 29). • When recording an MP3 CD to an Onkyo recording component, recording will start without performing a peak search when the [CD DUBBING] button is pressed on the recording component.
  • Page 56 • Make sure the cables and analog audio cables are connected correctly (see pages 19 to 25). • If you’re using an Onkyo component for timed playback or recording, you must set the Input Display to match that component (see page 29).
  • Page 57: Specifications

    Others: 300 dBf (30 µV) 40 dB 0.7% CR-515 10 Hz–20 kHz 95 dB 0.009% Below threshold of measurability 1.3 V/1.0 k Ω CR-315 Others: 56 W Others: 0.25 W × × × 352.5 mm (8-1/16" 4-9/16" 13-7/8") CR-315 19 W + 19 W (4 Ω , 1 kHz, FTC) ×...
  • Page 58 CR515,315_En.book Page 58 Wednesday, June 7, 2006 2:36 PM Memo...
  • Page 59 CR515,315_En.book Page 59 Wednesday, June 7, 2006 2:36 PM Memo...
  • Page 60 Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/ SN 29344258 (C) Copyright 2006 ONKYO CORPORATION Japan. All rights reserved. HOMEPAGE http://www.onkyo.com/ I0606-1 * 2 9 3 4 4 2 5 8 *...

Table of Contents