Listening To An Fm/Am Station; Adjusting The Antenna - Onkyo CR-B8 Instruction Manual

CRB8.book 37 ページ ２００５年８月１８日 木曜日 午後６時４０分

Listening to an FM/AM Station

First, program the stations into preset channels (see
pages 34 and 36).
Display
Turn on the power to the unit before you start the proce-
dure.
1
Select FM or AM.
Press the INPUT
select FM or AM.
The channel selected most recently will
be recalled.
AUTO
SOURCE
2
Turn MULTI JOG or press the dial
repeatedly to select the desired
preset channel.
Turn the dial counterclockwise to select
a lower channel number, or turn it clock-
wise to select a higher channel number.
AUTO
SOURCE

Adjusting the Antenna

Adjusting and installing the FM antenna
Adjust the location of the FM antenna while
listening to an FM broadcast.
1
Change the direction of the
antenna to determine the best
reception.
1
2
or button to
FM ST
FM ST
2
Affix the antenna using a thumbtack.
(Do not press the thumbtack through
the antenna.)
Caution: Be careful not to prick your
finger!
Using the remote controller
2
Adjusting the AM antenna
Adjust the location and position of the
AM antenna while listening to an AM
broadcast to determine the best recep-
tion.
1
37