Using The Remote Controller; Changing The Display Information - Onkyo CR-B8 Instruction Manual

CRB8.book 25 ページ ２００５年８月１８日 木曜日 午後６時４０分

Using the Remote Controller

Press the number buttons as
described in the examples below
to play back the desired track.
The track
Press
to play
8
10
34
represents the tens digit.
For MP3 discs, tracks in the current
group can be selected.
Press to locate a particular point
in a track.
Press and hold to fast-forward or
to fast-reverse during playback or in
pause mode until you locate the desired
point.
Press to select the track to play.
• Press to locate the beginning of
a playing or paused track. Press
repeatedly to select the previous
tracks in reverse order.
• To select the next tracks in order,
press repeatedly.
For MP3 discs, you can also select
tracks in other groups.

Changing the Display Information

Press DISPLAY on the unit repeatedly to change the display as follows:
• During playback or pause
C D
SOURCE TRACK
C D
SOURCE TRACK
C D
SOURCE TRACK
Lights up while the elapsed time of the playing track is displayed.
"REMAIN"
REMAIN
Lights up while the time remaining on the playing track is displayed.
"TOTAL REMAIN"
TOTAL REMAIN
Lights up while the time remaining on the disc is displayed.
When performing Random playback, or the total time meets or
exceeds 99 minutes 59 seconds, "--:--" appears.
Playing a CD —Continued
Press to change display
information.
Adjust the volume level.
Press VOLUME to raise the level
and VOLUME to lower the level.
Press to switch the source to
CD.
Press to stop playback.
Press to play.
Playback starts if the CD is in the unit. If
the unit is in Standby mode, it turns on
automatically.
Press to pause.
To resume playback, press Pause (
or CD .
Note:
For information on MP3 discs, see page 28.
)
25