Specifications; Tuner Section; Audio Inputs; Audio Outputs - Onkyo CR-B8 Instruction Manual

CRB8.book 54 ページ ２００５年８月１８日 木曜日 午後６時４０分
Specifications
General
Power Supply: AC 220 V, 50 Hz/120 V/60 Hz
Power Consumption: 68 W
Stand-by Power
Consumption: 0.3 W/0.2 W
Dimensions (W x H x D):155 W x 241 H x 354 D mm
Weight: 4.6 kg
I Audio Inputs
Analog Inputs: LINE, TAPE, HDD
I Audio Outputs
Digital Outputs: Optical: 1
Analog Outputs: TAPE, HDD
Subwoofer Pre Outputs: 1
Speaker Outputs: 2
Phones: 1
Amplifier Section
14 W + 14 W (8 Ω , 40 Hz–20 kHz THD,
Power Output:
0.4 %)
19 W + 19 W (4 Ω , 1 kHz THD, 0.4 %)
26 W + 26 W (4 Ω , JEITA)
Dynamic Power:
THD (Total Harmonic
Distortion): 0.4 % (1 kHz Power Output)
0.4 % (40 Hz–20 kHz Power Output)
25 (8 Ω )
Damping Factor:
Input Sensitivity and
150 mV/50 k Ω (LINE)
Impedance:
Output Level and
150 mV/2.2 k Ω (REC OUT)
Impedance:
Frequency Response: 10 Hz–100 kHz/±3 dB (LINE)
Tone Control: ±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
+4.5 dB, 80 Hz (S.BASS 1)
+7.5 dB, 80 Hz (S.BASS 2)
SN Ratio: 100 dB (LINE, IHF-A)
4 Ω –16 Ω
Speaker Impedance:
54

Tuner Section

I FM
Tuning Frequency Range: 87.5 MHz–108 MHz
Stereo: 17.2 dBf 2 µV (75 Ω IHF)
Usable Sensitivity:
Mono: 11.2 dBf 1 µV (75 Ω IHF)
S/N Ratio: Stereo: 65 dB (IHF-A)
Mono: 67 dB (IHF-A)
THD: Stereo: 0.5 % (1 kHz)
Mono: 0.4 % (1 kHz)
Stereo Separation: 40 dB (1 kHz)
I AM
Tuning Frequency Range: 522 kHz–1611 kHz
Usable Sensitivity: 30 µV
S/N Ratio: 40 dB
THD: 0.7 % (1 kHz)
CD
Frequency Response: 10 Hz–20 kHz
Audio Dynamic Range: 92 dB
THD (Total Harmonic
Distortion): 0.009 %
Wow and Flutter: Below threshold of measurability
(±0.001 % W.PEAK)
Audio Output (Digital/
Optical): –22.5 dBm
Audio Output/
1.3 V/2.2 k Ω
Impedance (Analog):
Specifications and features are subject to change without
notice.