Changing The Fm/Am Preset Channels; Tips For Changing The Preset Channels; Copying A Preset Channel - Preset Copy - Onkyo CR-B8 Instruction Manual

CRB8.book 40 ページ ２００５年８月１８日 木曜日 午後６時４０分

Changing the FM/AM Preset Channels

Using the delete and copy functions, you can delete preset stations, copy a preset station to another channel, or
change the channel number.
Tips for Changing the Preset
Channels
To change the channel number:
Use the copy and delete functions.
For example, if you wish to change channel 4 (which has
an FM station programmed) to channel 6 (an empty
channel):
1
Copy the station in channel 4 to channel 6.
2
Delete the station in channel 4.
Copying a Preset Channel – Preset
Copy
If you copy a preset channel to another channel, the
name of the preset channel (see page 42) is also copied
to the other channel.
Display
1
Call the preset channel you wish to
copy.
2 Press EDIT/NO/CLEAR and turn
MULTI JOG until "PresetCopy?"
appears in the display.
40
2, 5
2-5
SOURCE
3
Press MULTI JOG.
SOURCE
4 Turn MULTI JOG to select the pre-
set channel number to which you
wish to copy (destination).
SOURCE
5 Press MULTI JOG to confirm.
If "Complete" appears:
The same radio station is copied to the
preset channel.
If "Overwrite?" appears :
The channel you wish to copy to is regis-
tered already.
• To register the new radio station by
deleting the existing radio station:
Press MULTI JOG.
• To cancel copying:
Press EDIT/NO/CLEAR.
Using the remote controller
2, 4
2
3, 5