Rear Panel - Onkyo CR-505DAB Instruction Manual

Controls & Connectors—Continued

Rear Panel

For detailed information, refer to the pages in parentheses.
1
REMOTE CONTROL (15)
This (Remote Interactive) connector can be con-
nected to the connector on another Onkyo compo-
nent. To use , you must make an analog RCA/phono
connection between the CR-505DAB and your other
component, even if they are connected digitally.
2
DAB ANTENNA (13)
This connector is for connecting the supplied DAB
antenna. CR-505DAB only scans UK Band III.
FM 75 Ω ANTENNA (12, 13)
3
This connector is for connecting an FM antenna.
4
AM ANTENNA (12, 13)
These push terminals are for connecting an AM antenna.
5
OPTICAL DIGITAL OUT (14, 15)
This connector can be used to connect a Mini Disc
recorder or other component with digital input.
1 2 3 4
REMOTE
DAB FM75
CONTROL
AM
ANTENNA
L
IN IN IN
R
TAPE MD LINE
L
OUT OUT
R
8 9 0
5 6 7
SPEAKERS
R
SUB
OPTICAL
WOOFER
DIGITAL
OUT PRE OUT
6
SUBWOOFER PRE OUT (11)
This RCA/phono connector can be used to connect an
active subwoofer.
7
SPEAKERS (11)
These terminals are for connecting left and right speakers.
8
TAPE IN/OUT (14)
These RCA/phono connectors can be used to connect a
cassette tape deck or other recorder with analog inputs
and outputs.
9
MD IN/OUT (14, 15)
These RCA/phono connectors can be used to connect a
Mini Disc recorder or other recorder with analog inputs
and outputs.
0
LINE IN (14)
These RCA/phono connectors can be used to connect
another component.
L
9