Connecting The Components - Nortel NN43114-100 User Manual

Connecting the components

Connecting the components
Figure 4 shows connections on the IP Phone 1150E.
Figure 4: IP Phone 1150E connections
Accessory
Expansion
module port*
PC Ethernet
port
Agent headset
port
WARNING *Ensure that the protective rubber cap on
the IP Phone 1150E: Accessory Expansion Module port
is in place when the port is not in use. Connecting
anything other than the proper Accessory Expansion
Module connector to this port can cause damage to the
phone.
30
Tilt lever button
Supervisor
headset port
LAN Ethernet port
AC adapter port
USB port