Using Virtual Office; Logging In To Virtual Office - Nortel NN43114-100 User Manual

Yes
or

Using Virtual Office

The Virtual Office (VO) feature provides a service you can use while you
are away from your desk to transfer calls, and all your office phone
features, to a remote phone. Virtual Office makes this possible by
allowing you to use another IP Phone 1150E (the Remote phone) to log in
to your own home or office IP Phone (the Office phone). After you log in,
you can access the DNs, autodial numbers, key layout, feature keys, and
voicemail features that are configured on your own home or office IP
Phone.
The Virtual Office feature for the IP Phone 1150E only allows an IP Phone
1150E VO login from an IP Phone 1150E. Virtual Office login of IP Phone
1150E into/from any other set type is blocked. The agent's phone must
have a secondary (or private) DN assigned, which is then used as the VO
User Id.
To use Virtual Office, you need your DN and preconfigured Station
Control Password (SCPW). You must activate Virtual Office on your
Office phone before you can connect to it from a Remote phone. See
"Logging in to Virtual Office" on page 129.
Note: Contact your system administrator to verify if the Virtual Office
feature is available for your use.

Logging in to Virtual Office

To activate Virtual Office on your Office phone from your Remote
phone:
2. Choose one of the following soft keys:
No
— Yes
— No
1. Press the
Additional phone features
to delete the entire Redial List
to return to the previous screen
Services key.
129