Table of Contents
Advertisement
M o t i o n C o n t r o l D a m p e r S e r v i c e - Y a r i
2 0 0 H o u r S e r v i c e
1
Turn the compression adjuster knob counter-clockwise, to the full open
position, until it stops.
Remove the retaining screw and remove the knob.
2
Unthread the compression damper top cap.
Remove the compression damper by pulling up firmly and slowly, while
gently rotating the damper in a circular motion.
Do not force the damper out of the upper tube if there is resistance.
This can cause separation of the piston from the damper tube.
3
Remove the fork from the work stand and pour the suspension oil into
an oil pan.
4
Clamp the fork into the work stand.
Push the shaft into the upper tube to avoid scratching the shaft while
removing the retaining ring. Remove the retaining ring.
D a m p e r R e m o v a l
NOTI CE
2.5 mm
24 mm
Motion Control Damper Service - Yari
50
Advertisement
Table of Contents
