SRAM ROCK SHOX Lyrik Service Manual page 49

RC R: Install the cable stop collar with the housing guide in the
6 o'clock forward position, angled ≈20° degrees from center.
Install the remote spool onto the hex adjuster with the spool cable set
screw oriented within the 87° range zone.
Tighten the spool retaining screw.
4 RCT R / RC R: Tighten the cable stop collar set screw.
Consult the OneLoc user manual at
oneloc for cable and remote installation instructions.
200 Hour Service Continue the 200 Hour Service with
www.sram.com/rockshox/products/
Lower Leg
RC R
2 mm 0.25 - 0.6 N·m (2.2 - 5.3 in-lb)
Installation.
87°
20°
2 mm 1.2 N·m (10 in-lb)
2 mm 0.25 - 0.6 N·m (2.2 - 5.3 in-lb)
Damper Installation
49