Test Lockout - SRAM ROCK SHOX Lyrik Service Manual

T e s t L o c k o u t
1 RCT3 / RCT R: Rotate the compression cam clockwise until it stops, to
the locked out position.
RCT R / RC R: Use the 13 mm wrench to hold the cam locked out while
compressing the damper.
Push down on the damper assembly to test the bleed.
RCT3 / RCT R: The rebound damper shaft should not move more than
2 mm. If the shaft moves more than 2 mm while locked out, repeat the
bleed process. If the bleed was successful, rotate the compression cam
counter-clockwise until it stops, to the unlocked position.
RC / RC R: Consistent resistance should be felt with no gaps in
movement.
13 mm
45

Test Lockout