SRAM ROCK SHOX Lyrik Service Manual page 24

5 Thread the shaft bolt into the end of the air spring shaft for added grip.
With the shaft pushed half way into the upper tube, quickly and firmly
pull the shaft out to remove the seal head and air spring assemblies
from the upper tube.
Remove the bolt.
6 Remove the seal head, wave spring, retaining washer, and top out
bumper from the air spring shaft.
Discard the seal head and wave spring.
Clean and inspect the shaft for damage.
Clean the top out bumper.
Scratches on the air spring shaft can cause air to leak. If a scratch is
visible the air spring assembly may need to be replaced.
NOTI CE
Dual Position Air
DebonAir
Dual Position Air
DebonAir
Dual Position Air
DebonAir
Dual Position Air
DebonAir
24
Air Spring Removal