SRAM ROCK SHOX Lyrik Service Manual page 19

4 Soak the new foam rings in suspension oil.
Install the new foam rings into the lower leg.
5
Remove the outer wire spring from each new dust wiper seal and set
them aside.
6 Insert the narrow end of a new wiper seal into the recessed end of the
Dust Seal Installation tool.
7 Stabilize the lower leg on a bench top. Hold the lower leg steady and
press the wiper seal into the lower leg until the top of the seal is flush
with the top of the lower leg.
Repeat on the other side.
Only press the wiper seal into the lower leg until it is flush with the top
surface of the lower leg. Pressing the wiper seal below the top surface
of the lower leg will compress the foam ring.
NOTI CE
Maxima PLUSH Dynamic Suspension Lube Light
RockShox 35 mm Dust Seal Installation Tool
19
Lower Leg Seal Service