BMW M5 Owner's Handbook Manual page 92

CONTROLS
Importing a driver profile
The existing settings of the currently used driver
profile are overwritten by the settings of the im‐
ported driver profile.
Via iDrive:
1. "My Vehicle"
2. "Driver profiles"
3. Select the driver profile to be overwritten.
The driver profile marked with this symbol
can be overwritten.
4. "Import driver profile"
5. Select a medium for importing the driver pro‐
file.
▷ USB storage medium: "USB device"
If necessary, select the USB storage me‐
dium.
▷ Online.
6. Select the driver profile to be imported.
System limits
It is not always possible to assign a remote con‐
trol uniquely to a driver. This may be the case in
the following scenarios:
▷ The front passenger unlocks the vehicle with
their remote control, but another person
drives.
▷ The driver unlocks the vehicle using Comfort
Access and is carrying a number of remote
controls.
▷ If there is a change of driver without the vehi‐
cle being locked and unlocked.
▷ If a number of remote controls are located in
the area outside of the vehicle.
Settings
General
Various settings are possible for opening and
closing, depending on the equipment installed
and the country specifications.
92
Opening and closing
Online Edition for Part no. 01402989787 - II/18
These settings are saved for the currently used
driver profile.
Unlocking
Doors
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Doors/Key"
4. "Driver's door" or
5. Select the desired setting:
▷ "Driver's door only"
Only the driver's door and fuel filler flap
are unlocked. Pressing again unlocks the
entire vehicle.
▷ "All doors"
The entire vehicle is unlocked.
Boot lid
Depending on the equipment installed and the
country specifications, these settings may not be
available.
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Doors/Key"
4. "Tailgate" or
door(s)"
5. Select the desired setting:
▷ "Tailgate"
Boot lid is opened.
▷ "Tailgate and door(s)"
Boot lid is opened and the doors are un‐
locked.
"All doors"
"Tailgate and