BMW M5 Owner's Handbook Manual page 319

means that the settings of the sets of tyres last
used can be selected after a tyre or wheel
change.
Calling up the menu
Via iDrive:
1. "My Vehicle"
2. "Vehicle status"
3. "Tyre Pressure Monitor"
To adjust the settings
Via iDrive:
1. "Tyre settings"
2. Select tyres:
▷ "Summer tyres"
▷ "Winter tyres/all-season tyres"
3. "Current:"
4. Select the type of tyre fitted on the rear axle:
▷ Tyre size, for example 265/40 R19 102 V.
▷ In the case of tyres with special approval:
"Other tyre"
5. Select the load status of the vehicle if a tyre
size has been selected.
6. "Confirm settings"
The measurement of the current tyre inflation
pressure is started. The progress of the meas‐
urement is shown.
Status display
Current status
The status of the system, for example whether
the system is active, can be shown on the Con‐
trol Display.
Via iDrive:
1. "My Vehicle"
2. "Vehicle status"
3. "Tyre Pressure Monitor"
The current status is displayed.
Online Edition for Part no. 01402989787 - II/18
Wheels and tyres
Current tyre inflation pressure
The current tyre inflation pressure is displayed
for each tyre.
The current tyre inflation pressures can change
as a result of vehicle operation or the outside
temperature.
Current tyre temperature
The current tyre temperatures are shown.
The current tyre temperatures can change as a
result of vehicle operation or the outside temper‐
ature.
Specified pressure
The specified pressure for the tyres on the front
and rear axle is displayed.
The specified pressures are values stored in the
vehicle.
The temperature effects of vehicle operation and
ambient conditions are taken into account in the
calculation for the specified pressure. Independ‐
ently of the weather conditions, tyre tempera‐
tures and driving times, the appropriate specified
pressure is always displayed.
The displayed specified pressure may change
and differ from that stated in the tyre inflation
pressure information on the door pillar of the
driver's door. The tyre inflation pressure can thus
be corrected to the value of the displayed speci‐
fied pressures.
The specified pressure is adapted immediately if
the load status is changed in the tyre settings.
Tyre statuses
General
The tyre and system status is denoted by the
wheel colour and message on the Control Dis‐
play.
If applicable, existing messages are not deleted if
the displayed specified pressure is not reached
on correction of the tyre inflation pressure.
MOBILITY
319