CONTROLS
Displays
Vehicle equipment
This chapter describes all standard, country-spe‐
cific and special equipment available for the
model series. Therefore equipment which is not
installed in your vehicle, for example on account
of the optional equipment selected or the coun‐
try specification, may also be described here.
This also applies to safety-relevant functions and
systems. Comply with the relevant laws and reg‐
ulations when using the corresponding functions
and systems.
Instrument cluster
General
The displays in the instrument cluster can some‐
times differ from the illustrations in this Owner's
Handbook.
Overview
1 Fuel
gauge 148
Range 151
2 Speedometer
3 Drive dynamic
systems 150
Gear display,
Drivelogic 150
4 Revolution
counter 149
Selection
lists 155
Navigation display
144
Displays
Online Edition for Part no. 01402989787 - II/18
Shift
Lights 162
5 Engine
temperature 149
6 Outside
temperature 149
7 Variable displays
Check
Control 145
On-board
computer 156
Service
requirements 151
8 Variable displays
Speed Limit
Info 153
Time 149
9 To reset the trip distance
Setting the operating mode
Principle
The instrument cluster can be set to 3 different
operating modes.
To adjust
Via iDrive:
1.
"My Vehicle"
2.
"iDrive settings"
3.
"Displays"
4.
"Instrument cluster"
5.
Select the desired setting:
▷
"STANDARD": all displays in the instru‐
ment cluster are active.
▷
"REDUCED": the displays in the instru‐
ment cluster are reduced to the minimum
necessary.
▷
"INDIVIDUAL": all displays in the instru‐
ment cluster are active. Individual displays
can be selected separately.
recorder 157