BMW M5 Owner's Handbook Manual page 159

3. "Trip computer"
4. If necessary, tilt the Controller to the left.
▷ "Reset": all values are reset.
▷ "Reset automatically": all values are
reset if the vehicle is at a standstill for ap‐
proximately 4 hours.
5. If necessary, "OK"
Sport displays
General
Depending on the equipment installed, the cur‐
rent values for performance and torque can be
shown on the Control Display.
Displays
Via iDrive:
1. "My Vehicle"
2. "Technology in action"
3. "Sport displays"
Speed warning
Principle
A speed limit can be set which triggers a warning
when it is reached.
General
The warning is repeated if the vehicle speed ex‐
ceeds the set speed limit again, after it has drop‐
ped below 5 km/h/3 mph.
Displaying, setting or altering the
speed warning
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
Online Edition for Part no. 01402989787 - II/18
Displays
4. "Warning at:"
5. Turn the Controller until the desired speed is
displayed.
6. Press the Controller.
Activating/deactivating the
speed warning
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Speed warning"
Setting the current speed as the
speed warning
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Select current speed"
Vehicle status
General
The status can be displayed or actions per‐
formed for some systems.
Calling up the vehicle status
Via iDrive:
1. "My Vehicle"
2. "Vehicle status"
Overview of the information
▷ "Flat Tyre Monitor": status of the runflat
indicator, see page 323.
▷ "Tyre Pressure Monitor": status of the
Tyre Pressure Monitor, see page 318.
CONTROLS
159