Venting Arrangements - Horizontal Terminations Using Rigid Pipe; Venting Arrangements - Straight Horizontal Termination - HAMPTON BAY H35U-NG Owners & Installation Manual

Venting Arrangements - Horizontal Terminations Using Rigid Pipe

The two diagrams show all allowable combina-
tions of straight horizontal termination using
Rigid Pipe. Restrictor position "A".
Only a snorkel or FPI Riser vent may be used as
shown. No other termination cap is permitted.

Venting Arrangements - Straight Horizontal Termination

The diagrams show all allowable combina-
tions of straight horizontal termination using
Rigid Pipe. Restrictor position "A".
Only a snorkel or FPI Riser vent may be used
as shown in the noted diagrams. No other
termination cap is permitted.
Dangerous operating conditions will occur
if these instructions are not adhered to.
Hampton® H35U Direct Vent Freestanding Gas Stove
Snorkel Termination
Snorkel Termination
installation
Riser Vent Termination
Riser Vent Termination
*If this is an outside corner, the minimum dis-
tance between the vent and the outside corner is
6" (15cm). See "F" on the diagram in the "Exterior
Vent Terminal Locations" section.
21