Table of Contents
Advertisement
H35U
installation
14) Using the Allen wrench as shown in Fig.4,
rotate the screw clockwise until snug, do
not overtighten.
Fig.4
WARNING!
Do not overtighten the screw.
Recommended to
grip the wrench by the short side.
15
) Verify that if the conversion is from NG to
LPG, the screw must be reassembled with
the red o-ring visible (Fig. 5).
LPG Configuration
Red o-ring visible
Fig.5
16
) Reassemble the black protection cap
(Fig. 6).
Fig. 6
WARNING!
Also check that the pilot and main
burner injectors are appropriate for
the gas type.
36
920-448
17) Reverse steps 4) to 2).
18) Attach clear label "This unit has been
converted to LPG" near or on top of the
serial # decal.
19) Replace yellow "Natural Gas" label with
red "LPG" label.
2
Hampton® H35U Direct Vent Freestanding Gas Stove
02/18/22
Advertisement
Table of Contents
