Rigid Pipe Venting Systems Horizontal Or Vertical Terminations - HAMPTON BAY Hampton H25-NG Owners & Installation Manual

INSTALLATION
Alternate
Horizontal
Termination
Caps
WARNING:
Do not combine venting components from
different venting systems.
However use of the the AstroCap
Riser is acceptable with all systems.
This product has been evaluated by Intertek for
using a Dura-Vent Flue Adaptor in conjunction
with Selkirk Direct-Temp and Ameri Vent Direct
venting systems. Use of these systems with
the Direct Vent GS starting collar is deemed
acceptable and does not affect the Intertek WHI
listing of components.
The FPI AstroCap TM and FPI Riser Vent terminal is certified for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent
GS, American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPI
Fireplace Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.
12
RIGID PIPE VENTING SYSTEMS
Horizontal or Vertical Terminations
and FPI
TM
When using piping other than
Simpson Dura-Vent, 3 screws must be
used to secure rigid pipe to adaptor.
TM , and FPI AstroCap TM are the proprietary trademarks of FPI
Hampton H25 Direct Vent Freestanding Gas Stove