Adjustments In The Configuration Mode (Cf) - Raytheon 133-560 Series Operator's Manual

After the configuration mode is ended the display alternates between the current heading
and the current heading sensor.
Defined adjustments can be read--out in the service mode (refer to section 2.9).
3.3.2

Adjustments in the configuration mode (CF)

The sequence and the meaning of the available parameters is shown in the table below:
Current
No.
0
1
2
3649.DOC010102
Operator manual
Indications
Configuration mode selected
(yellow/red)
"G_AL" (Course bus only)
Repeater Compass as steering repeater for gyro com-
pass equipment without external operator with alarm
indicator.
Heading is transmitted by a gyro compass or Raytheon
GPS compass.
"G_M_"
Repeater Compass for gyro, magnetic or GPS compass.
Operating with NMEA only one telegram must be activa-
ted.
27
REPEATER
133--560
Comments, notes
Edition: July 06, 2005