Table of Contents
Advertisement
simultaneously
After reaching the configuration mode (CF) the Repeater Compass can be adjusted.
After approx. 5 seconds of no operation the configuration mode ends and the current adjust-
ments are stored automatically.
By operating the right key the parameter can be selected successively. By operating the left
key "
" the parameter can be activated or deactivated.
The adjustments can be changed by operating the left key.
The indication of defined parameter/adjustments in the display is flashing. Deactivated ad-
justments light up permanently.
Edition: July 06, 2005
Operator manual
Indications
(green)
(yellow)
(yellow)
(yellow)
26
Comments, notes
Operate both keys simultaneously for
approx. 10 seconds until
--
the display indicates "--CF--"
3649.DOC010102
Advertisement
Table of Contents
