Table of Contents
Advertisement
3
Installation of the Repeater Compass
3.1
General
3.1.1
Mounting of the Repeater Compass
The series of repeaters type "133--560 NG..." are assembled in different enclosures for:
-- desk--flush mounting
-- bulkhead mounting
-- wall mounting
For mounting the Repeater Compass pay attention to the following:
-- The cards, the operating and indicating elements should be well accessible.
-- Protect the cards against solar radiation.
-- Ensure the type of enclosure.
-- The Repeater Compass should not be installed in oil--containing ambient air.
-- For dimensions and drillings see dimensional drawings in the annex.
-- Ensure enough mounting space for the cable entry.
-- The Repeater Compass should be mounted seaworthy.
3649.DOC010102
Operator manual
WARNING!
Before establishing the cable connection the supply
voltage must be switched off. Ensure that the supply
voltage cannot be switched on during installation.
CAUTION!
Do not open the Repeater Compass when mounting it
or during the normal operation.
23
REPEATER
133--560
Edition: July 06, 2005
Advertisement
Table of Contents
