Table of Contents
Advertisement
2.9
Service mode
In the service mode the current adjustments, the configuration and the software version of
the Repeater Compass can be read--out. In this mode the adjustments cannot be changed
(refer to section 3.3).
After operating no key for approx. 5 seconds the Repeater Compass changes to normal
operation mode automatically. In the normal operation mode the heading is indicated in the
display. Every 30 seconds the display shows the heading sensor in rotation.
simultaneously
Edition: July 06, 2005
Operator manual
Indications
(g
(green)
(yellow)
18
Comments, notes
Do not operate both keys for
too long:
--
after approx. 8 seconds the
service mode (Addr.) is
started
--
after approx. 10 seconds
the configuration mode is
started.
Operate both keys simultaneously until
--
the display indicates '8.8.8.8.'
3649.DOC010102
Advertisement
Table of Contents
