Raytheon 133-560 Series Operator's Manual page 11

-- 5. Function:
3649.DOC010102
Operator manual
CORRECTION of the Analog Indications (Cards) (see section 2.7.3)
NOTE!
The analog indications are adjusted by the manufacturer.
A correction of the analog indications is not needed in nor-
mal operation. The correction is required in the case of de-
synchronisation of the analog and digital display only.
The correction mode is selected by operating the keys "
simultaneously for approx. 15s until
the " " key or the "
correspondence with the lubber line.
Approx. 10s after the last card adjustment the "CORRECTION" function is
completed and the current settings are stored.
Then the function "DIM" is available as primary function.
7
" key the display value of the cards is corrected in
REPEATER
133--560
" and " "
is indicated. By operating
Edition: July 06, 2005