Function Keys - Raytheon 133-560 Series Operator's Manual

1.3.1

Function keys

Various functions can be selected via two keys on the right side of the front panel:
-- 1. Function:
-- 2. Function:
-- 3. Function:
-- 4. Function:
Edition: July 06, 2005
Operator manual
DIMMING (see section 2.7.1)
This function is available in the normal operation mode. It is not specially
indicated. With the "
darker or brighter.
TEST (see section 2.7.2)
This function is activated by operating the keys "
simultaneously for approx. 2s until the display shows
After releasing both keys, the test runs on its own.
The dimming of all displays and lightings, the completeness of the digital
display and the function of the analog displays is tested.
The test lasts approx. 3s.
By operating the " " key the current adjustments and configurations are
shown. (see section 2.9)
Can Bus address
The Can bus address mode is activated by operating the keys "
" " for approx. 5s until the display shows
CONFIGURATION (see section 3.3)
The configuration mode is activated by operating the keys "
simultaneously for approx. 10s until
By operating the " " key the required configuration mode is selected and
can be activated by operating the "
flashing; non--active configurations light up permanently.
6
" key or the " " key the setting can be made
" key. Active configurations are
" and " "
.
" and
.
" and "
is indicated.
3649.DOC010102
"