Fault Operation - Raytheon 133-560 Series Operator's Manual

2.8

Fault operation

Effect:
Measures: Check connections, or call Raytheon Marine service.
3649.DOC010102
Operator manual
NOTE!
All possible error indications, their causes and required
measures are described in detail in section 4.2.2.
The heading indication on the digital display does not correspond to the
heading of the ship.
Indications
(red)
or:
Comments, notes
-- LED lights up red continuously and cannot be dimmed.
Types of errors:
"- - - - - -.- -" :
-- Serial interface defective or
-- transmitted telegram invalid or
-- input signal disturbed or
-- configuration not according to the current telegrams or
operation mode (operator fault)
"Con" :
-- No data transmitted or
-- serial interface is not connected.
17
REPEATER
133--560
Edition: July 06, 2005