Type Plates - Fluke VIBGUARD IIoT Installation And Operation Manual

2.4 Type plates

System module
The type plate on the system module contains the following information:
Type: Item number (VIB 7.820), hardware status (V1.3) of the System module.
S/N: Serial number of the system module, 7 digits, starting with 95..
HW: Status (V 1.31), number (239), variant (LD = LineDrive) of the built-in board.
Protective housing
The type plate on the protective housing, or on the power supply cabling contains the following information about
the entire system:
Type: VIB 7.8xx-SDH or VIB 7.8xx-PS - Item number of the entire system.
S/N: Production week (WWYY) of the entire system and serial number of the system module installed.
HW: Hardware status of the protective housing (e.g. V 2.0).
VIBGUARD IIoT
Installation and Operation
9