Cable Type Specification; Cable Types; Cable Length; Fault Tolerance - Fluke OptiView III Series Getting Started Manual

OptiView Series III
TM
Getting Started Guide

Cable Type Specification

Cable Types

Unshielded Twisted Pair LAN cables (100 and 120 Ohm UTP category 3, 4, 5, 5E, and 6 ISO/IEC Class C and D)
Foil-screened Twisted Pair cables (100 and 120 Ohm ScTP category 3, 4, 5, and 6 ISO/IEC Class C and D)

Cable Length

Measurable cable lengths are from 3 feet (.9 meter) to 500 feet (152 meters). Within this cable length, the
accuracy is +/-6 feet (+/-2 meters).
Length accuracy is dependent upon the cable type selected in the Cable Test screen
with its ideal NVP (nominal velocity of propagation) matching the NVP of the cable
under test.

Fault Tolerance

The RJ-45 10/100/1000BASE-T Ethernet connection on the analyzer is designed to withstand a maximum of
100 volts.
22
Note