Install Attachment Drive Idler Assembly
See Figure 27.
IMPORTANT: Push attachment brake arm down as idler
assembly is reinstalled.
1.
Secure attachment idler arm to hub with original
tapping screws.
2.
Reinstall torsion spring around attachment idler arm.
IMPORTANT: Ensure attachment idler arm has tension.
1
1. Torsion Spring
Figure 27
3.
Reinstall attachment brake spring onto attachment
brake arm and frame. See Figure 28.
4.
Reinstall auger housing. See Reinstall Auger Housing
on page 11.
5.
Adjust attachment drive clutch. Refer to Operator's
Manual for adjustment procedure.
6.
Reconnect spark plug wire.
IMPORTANT: Check all adjustments after first use.
EN – 18
Figure 28