Dual-Handle Interlock Replacement; Remove Interlock Cam; Install Interlock Cams - Ariens Sno-Thro Professional Series Service Manual

DUAL-HANDLE INTERLOCK
REPLACEMENT

Remove Interlock Cam

IMPORTANT: Save all hardware for reinstallation.
See Figure 75.
1. Disconnect spring from interlock bracket.
2. Remove two spring clips securing interlock cams to
camshafts.
2
4
1
1. Spring Clip
2. Interlock Cam
3. Spring
4. Interlock Bracket
3
Figure 75
IMPORTANT: Interlock cams will fall from camshafts in
next step.
3. Remove hardware retaining camshafts to clutch levers
and remove camshafts from interlock bracket. See
Figure 76.
4. Remove cams.

Install Interlock Cams

IMPORTANT: Ensure nylon bushings are seated in
interlock bracket. See Figure 77.
1. Reinstall right camshaft through interlock bracket and
secure to clutch lever with one tapping screw.
EN – 37
Figure 76
Figure 77