Chute Gear Replacement; Remove Chute Rotation Gear - Ariens Sno-Thro Professional Series Service Manual

4
2
1. Short Axle
2. Flat Steel Washer
3. Differential Gear
4. Pinion Gear
5. Sleeve Spacer
See Figure 93.
4. Reinstall long axle into differential gear.
5. Reinstall E-ring onto axle end.
6. Reinstall bottom cover and secure with two tapping
screws and four hex bolts.
7. Ensure axle keys are in position and reinstall wheels
onto axles. Secure with snap clips.
8. Return unit to operating position.
9. Reconnect spark plug wire and fill fuel tank.
1
3
Figure 92
Figure 93

CHUTE GEAR REPLACEMENT

Remove Chute Rotation Gear

IMPORTANT: Save all hardware for reinstallation
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
See Figure 94.
3. Position discharge chute facing forward.
4. Remove hardware retaining chute gear cover and
5
remove cover.
5. Remove hairpin from hex rod and remove hex rod
from chute gear.
1. Tapping Screw
2. Chute Gear Cover
3. Hairpin
4. Hex Rod
EN – 44
2
4
Figure 94
1
3