Ariens Sno-Thro Professional Series Service Manual page 12

See Figure 9.
16. Remove attachment drive belts from attachment
sheave.
To assist belt removal, slowly pull recoil starter handle
while gently pulling belts from attachment sheave.
See Figure 10.
17. Position support, such as a trash can, under
handlebars so tractor / frame remains upright when
separated from auger housing.
18. Chock or block wheels to prevent tractor / frame
movement.
Figure 9
Figure 10
See Figure 11.
19. Remove hardware securing auger housing to frame.
20. Lift auger housing rear slightly to disengage from
mount rod and separate from unit.
1. Tapping Screw
2. Mount Rod
EN – 10
1
2
Figure 11